List all interfaces in order to locate the one that does not yet have an IP address via the ifconfig command. Next you will need to locate the static IP address of the Ubuntu host machine.
In the end it will fail so we will need to provide a static IP address. Ubuntu's network manager started to show this icon: indicating that it tries to retrieve an IP using DHCP. I mounted the SD card to the Ubuntu host machine and I created a file on the mounted SD card, ^path_to_mounted_sd^/rootfs/etc/network/interfaces.d/usb0 containing: allow-hotplug usb0Īfter saving the file and successfully un-mounting the SD card I put it in the Pi and plugged connected my Pi to my computer via a USB cable. In order to fix that I set static IP addresses on both ends. In my case the Ubuntu host machine could not connect to the Pi Zero via SSH because the Ubuntu machine failed to retrieve an IP address. I'd also recommend having a look at 'VNC Viewer' - a piece of free software that lets you run your pi as a virtual machine inside your mac, all you need is the IP address which you will get when doing the ssh connectionĪfter you've done what Hewitt says then this issue may occur: replace all text with this: dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet init=/usr/lib/raspi-config/init_resize.shīe careful with this step as the formatting is very picky in this fileĤ: Eject your MicroSD card and boot it up in your pi! make sure you plug the usb cable from your mac into the USB input of your pi - this can also power it.ĥ: Once its booted you should now be able to open up terminal, and using ping raspberrypi.local you can see the RPi's IP address.Ħ: Using this address in terminal tpye ssh It should ask you for a password, this will default be You can now eject the card and boot it on your RPiģ: Finally, open up the cmdline.txt. Use 'get info' to remove the extension on the file, and it should appear as an EXEC file.
I found this very helpful for setting up mine: ġ: open up the boot partition on the micro sd with finder and in the file config.txt add dtoverlay=dwc2 to a line on the bottom and save it.Ģ: Create a new file called ssh using textedit and save it onto the boot partition.
0 kommentar(er)
